Collections

Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Cut protection level

Environment of use

Fitting Shoes

Function

High vis co-certification

High vis classification

Hood

Lining

Material

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW!

Quality 1516 is a flame-retardant fabric carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Comfortable and flexible single jersey with inherent flame resistant properties. The fabric is certified for EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Inherently flame resistant material that is wind and waterproof with breathability. The material is certified according to: EN ISO 11611, EN ISO 11612, EN ISO 1149, EN 61482-1-2, EN 61482-1-1, EN ISO 20471, EN 13034, EN 343.

Quality 1532 is an inherent fabric which means that the flame retardant is built into the fibers. Wind-, and waterproofed with breathable function. Certified according to EN 1149-5, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN 343, EN ISO 20471. 

Quality 1530 is an inherent fabric which means that the flame resistant is built into the fibers. Wind-, and waterproofed and breathable. Certified according to EN 1149-3, EN 61482-1-2, EN 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN 343, EN ISO 20471.

Quality 1513 is an inherent fabric which means that the flame resistant properties are built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471. 

Inherent flame resistant and polyester free material with laminate and a soft inside made of fleece. Wind- and waterproof. The material is certified accordning to: EN ISO 11611, EN ISO 11612, EN 1149-5, EN 61482-1-2, EN ISO 20471, EN 13034, EN 343

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Flame resistant trousers that are oil, dirt and water-repellent. These durable trousers have practical and helpful pockets with lids and also outer knee pad pockets. Tested for industrial washing. 
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, IEC 61482-2. ATPV: 16,0 cal/cm².

Flame resistant trousers

Flame resistant t-shirt in a thin, breezy fabric that is extremely comfortable. Round neckline and reinforced neck and shoulder seams. 
Certified under EN 1149-5, EN ISO 14116.

Flame resistant t-shirt

Flame-resistant and metal-free winter parka, all you need and more in tough weather conditions. This oil, dirt and water-repellent hi-vis class 3 parka is ideal if you work in exposed flame environments. Shields you against the cold, wind and rain with its heat insulated lining, laminated fabric and taped seams. 
The parka has handwarmer pockets on both sides, chest pockets big enough for a mini tablet, and inside pockets with zips. Internally adjustable at the waist, and the sleeves can be adjusted using Velcro. Two-way zip, wristlets at sleeve ends and cut transfer reflector tape. 
With this parka, you can tackle any job in wintertime. The button-on helmet-fitted hood 2167 is sold separately. 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/cm² and ATPV 39 cal/cm².  EN 1149, EN ISO 11612, EN ISO 11611, EN 13034 and EN ISO 20471.  EN 343 4/1 – Water column rating: 12,000 mm.  EN 342 together with model 1817 – CLO rating 2.19, Icler 0.339 m² K/W.

Multinorm Winter Parka

The ultimate flame resistant winter jacket from Blåkläder, with a women’s cut. The ideal choice if you work in exposed flame environments, this jack- et also readily shields you against cold, wind and rain with its warm lining, laminated fabric and taped seams. 
A completely metal free garment with cut transfer reflector tape and reflective details on the shoulders ensuring visibility in every direction, cozy fleece inside the pockets and a two-way plastic zip. 
This oil, dirt and water-repellent jacket can overcome any weather challenges, so that you can tackle any job. Helmet-fitted hood 2167 sold separately. The jacket is also available in a men’s model 4517. 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/cm² and ATPV 39 cal/cm².  EN 1149, EN ISO 11612, EN ISO 11611, EN 13034 and EN ISO 20471.  EN 343 4/1 – Water column rating: 12,000 mm.  EN 342 together with model 1817 – CLO rating 2.19, Icler 0.326 m² K/W.

Women's Multinorm winter jacket

The ultimate flame retardant winter jacket from Blåkläder. The ideal choice if you work in exposed flame environments, this jacket also readily shields you against cold, wind and rain with its warm lining, laminated fabric and taped seams. 
A completely metal free garment with cut transfer reflector tape and reflective details on the shoulders ensuring visibility in every direction, cozy thermal fleece inside the pockets and a two-way plastic zip. 
This oil, dirt and water-repellent jacket can overcome any climate challenge, so you can tackle any job. Helmet-fitted hood 2167 sold separately. The jacket is also available in a women’s model 4917. 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/cm² and ATPV 39 cal/cm². EN 1149, EN ISO 11612, EN ISO 11611, EN 13034 and EN ISO 20471. EN 343 4/1 – Water column rating: 12,000 mm. EN 342 together with model 1817 – CLO rating 2.19, Icler 0.339 m² K/W.

Multinorm Winter Jacket

Thin and very flexible shell jacket whose material is inherently flame retardant. This wind and waterproof shell jacket, free of polyester and metal, is a highly sought-after product that is now becoming Blåkläder's first in the genre, and it comes with our tangible sense of quality. 
The jacket is equipped with soft and compliant transfer reflectors, has good breathability and dark areas in exposed areas. The jacket is equipped with loops on the chest to attaching gas detectors and oxygen meters. The slightly higher and adjustable hood can be adapted to have a helmet underneath. 
Certified according to EN 1149-5, EN 13034. EN ISO 20471. EN 343. EN ISO 11611. EN ISO 11612. IEC 61482-2.

Multinorm shell jacket

Thin and very flexible shell jacket in a women’s fit made from inherently flame-resistant material. This wind and waterproof shell jacket with taped seams, non-polyester and non-metal, is a highly sought-after product. The jacket is equipped with soft and flexible reflective transfers and has good breathability and dark colours in areas prone to dirt. 
The jacket is equipped with loops on the chest for attaching technical equipment such as microphones, gas detectors or oxygen meters. The slightly higher, adjustable hood can be adjusted to go over a helmet without reducing your field of vision. 
The shell jacket has a chest pocket with ID card holder, Napoleon pocket with room for a small tablet, two stomach pockets with zippers and an ID card holder in one of the pockets. Also available in a men’s model 4088. 
Certified to EN 1149-5, EN 13034, EN ISO 20471. EN 343. EN ISO 11611. EN ISO 11612. IEC 61482-2. ATPV: 21 cal/cm², ELIM: 19 cal/cm².

Women’s Multinorm Shell Jacket

This metal free, flame resistant bib overall in hi-vis class 2 genuinely delivers in the winter cold, wind and rain. For extra strength and protection, the bib overall is reinforced on the external knee pad pockets and at the back of the leg end. 
Adjustable width, cut transfer reflector tape for enhanced visibility, adjustable foot width, and dark fabric on areas prone to dirt. The braces are adjustable and detachable. The bib overall has belt loops at the waist and zip up to the knee, as well as a leg pocket, ruler pocket and handwarmer pockets. 
This oil, dirt and water-repellent bib overall can take anything! 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/ cm² and ATPV 39 cal/cm².  EN 1149, EN ISO 11612, EN ISO 11611, EN 13034, EN ISO 20471 and EN 14404.  EN 343 4/1 – Water column rating: 12,000 mm.  EN 342 together with models 4517, 4917 or 4527 – CLO rating 2.19, Icler 0.334 m² K/W.

Multinorm Winter Bib Overall

High-quality and shell trousers in high vis that are inherently flame-retardant. The oil, dirt and water-repellent trousers, which can be used as a layer on layer garment, are both wind and waterproof with taped seams, making it possible to work in them without any problems in all kinds of weather-exposed environments. 
The braces are removable and can be adjusted as needed. The material of the shell trousers is thin, very flexible and free of polyester. The trousers have a raised back, ruler pocket, leg pockets and knee protection pockets with CORDURA®/Kevlar®/Protal®-reinforcement. 
Certified according to EN 1149-5, EN 14404, EN 13034. EN ISO 20471. EN 343. EN ISO 11611. EN ISO 11612. IEC 61482-2.

Multinorm shell trousers

Multinorm quilt lined winter trouser with taped seams, detachable braces and snow lock is the ultimate winter trouser for work in extreme environments. Pocket solutions are flexible and all-round. 
You´ll find slanting pockets, bellowed back and side pockets. Detachable tool pockets: art. 2178 are sold separately. The ultimate winter trouser for work in all harsh environments. 
Certified according to EN 14404, EN 343, EN 342, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 34,0 cal/cm².

Multinorm Winter Trousers

Crafted from inherently flame retardant fabric, which means that the flame retardant properties are naturally present in its fibres. These soft overalls allow for easy movement and the knees are reinforced with CORDURA®/Kevlar®/Protal® fabric. 
They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life. Opening inside the pocket for access to clothing worn underneath. Ripstop fabric delivers exceptional tear strength. 
All C sizes can be lengthened to C-150 sizes. 
Certified under EN 1149-5, EN 13034 PB [6]. EN ISO 20471, Class 3. Certified according to EN ISO 11611, Class 1 A1+A2. EN ISO 11612 A1, A2, B1, C1, E1, F1. IEC 61482-2, class 1. ATPV: 11,9 cal/cm², HAF: 79,3%, LOI: 29,6%.

Multinorm inherent overalls

Metal- and polyester-free softshell jacket with women’s fit in hi-vis that is inherently flame-resistant. The wind and water-resistant jacket is made of an oil, dirt and water-repellent softshell material and has excellent breathability. It also has an extended back, pre-bent sleeves and cuffs at the sleeve ends, improving the already fantastic comfort. 
The jacket has functional pockets and two gas loops, which are hoops to hang gas detectors and oxygen meters in. This makes the softshell jacket extra useful for work in, for example, petrochemical environments or the oil and gas industry. 
It is certified according to EN 1149-5. EN 13034. EN ISO 20471. EN ISO 11611. EN ISO 11612. IEC 61482-2.

Women's Multinorm softshell Jacket

Metal- and polyester-free softshell jacket in Hi-vis that is inherently flame-retardant. The wind and water-resistant jacket is made of softshell material and has excellent breathability. It also has an extended back, pre-bent sleeves and cuffs at the sleeve ends that improve the already fantastic comfort. 
The jacket is equipped with two gas loops, which are hoops to hang gas detectors and oxygen meters in. This makes the softshell jacket extra useful for work in, for example, petrochemical environments or the oil and gas industry. 
It is certified according to EN 1149-5. EN 13034. EN ISO 20471. EN ISO 11611. EN ISO 11612. IEC 61482-2.

Multinorm softshell jacket

A lightly padded shell jacket suitable for all seasons, made from a wind and waterproof breathable material with an oil- and dirt-repellent surface. With an antistatic and inherently flame-resistant design, completely metal-free, it minimizes the risk of ignition and meets all requirements of the ATEX directive.
The shell jacket features a high collar and a concealed, robust two-way plastic zip. Reflective details enhance visibility, along with an extended back and a drawstring hem. Prepared with attachment points for hood 2164, sold separately.
The jacket is equipped with two gas loops for attaching gas detectors, oxygen meters and microphones. This makes it especially useful for work in petrochemical environments or the oil and gas industry. Also suitable for the energy sector, including roles in solar, wind and hydro power.
Certified according to EN 343 4.1, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2, APC 2.

Shell Jacket Inherent

Dirt and water-repellent overalls crafted from an inherently flame-resistant fabric, which means the flame-resistant properties are naturally present in its fibres. These soft overalls allow for easy movement and the knees are reinforced with CORDURA®/Kevlar®/Protal® fabric. 
They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life. Opening inside the pocket for access to clothing worn underneath. Ripstop fabric delivers exceptional tear strength. 
All C sizes can be lengthened to C-150 sizes. Tested and approved for 50 washes. 
Certified under EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11 cal/cm².