Colour

Certification

Collections

Flame resistant collection

Function

Hi-vis co-certification

Hi-vis classification

Hood

Lining

Material

Sustainability Label

Type of garment

Type of jacket

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

Lightweight 3-layer softshell fabric with 4-way stretch. Wind- and waterproof, breathable.

2-layer ripstop fabric with fleece inside, wind- and water repellent.

2-layer laminated polyester.  Wind- and waterproof fabric with breathable function 5000 mm/5000 g/m²/24h.

Inherently flame resistant material that is wind and waterproof with breathability. The material is certified according to: EN ISO 11611, EN ISO 11612, EN ISO 1149, EN 61482-1-2, EN 61482-1-1, EN ISO 20471, EN 13034, EN 343.

Quality 1532 is an inherent fabric which means that the flame resistance is built into the fibers. Wind-, and waterproofed with breathable function. Certified according to EN 1149-5, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN 343, EN ISO 20471. 

Inherent flame resistant and polyester free material with laminate and a soft inside made of fleece. Wind- and waterproof. The material is certified accordning to: EN ISO 11611, EN ISO 11612, EN 1149-5, EN 61482-1-2, EN ISO 20471, EN 13034, EN 343

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1519 is an inherent fabric which means that the flame resistance is built into the fibers. It is durable and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Lightweight softshell jacket that thanks to its material is extremely soft, comfortable and flexible. The jacket is double-coloured with contrasting colours in exposed areas for optimal visibility and safety when needed most. 
This certified highvis jacket has both the light, stretchy feel and the strength of a work garment. Additionally, its fabric is waterproof and windproof, the hood is removable if necessary. 
Certified according to EN ISO 20471, class 2. Combination Certification C.

Hi-Vis Softshell jacket

Comfortable furry pile jacket with fixed hood that keeps you warm during chilly autumn days. The jacket has zipped chest and side pockets. The back is extended and has an elastic cord to prevent cold air from entering around the waist. The cuffs also has an elastic cord as well as thumb holes.

Furry Pile Jacket

Smooth softshell jacket from the Unite collection in a comfortable fabric that is windproof and has a high breathability. For optimal comfort, the jacket has curved sleeves, extended back and fleece lined collar. 
The jacket is adjustable in sleeves and hem and has several practical pockets. Has an adjustable hood with drawstring.

Softshell jacket with hood

Lightweight wind and waterproof rain jacket with taped seams to keep you dry in bad weather. The jacket has removable hood and mesh lining for good ventilation and breathability. Waterproof to 5,000mm head of water. Available is an associated trousers 1866.

Rain Jacket

Flexible and versatile soft shell jacket with adjustable hood. Dark reflectors on the shoulders and back, plus robust zips. 
The jacket is designed to provide maximum freedom of movement and is made of a stretchy, wind and waterproof fabric.

Softshell jacket

Flame-resistant and metal-free winter parka, all you need and more in tough weather conditions. This oil, dirt and water-repellent hi-vis class 3 parka is ideal if you work in exposed flame environments. Shields you against the cold, wind and rain with its heat insulated lining, laminated fabric and taped seams. 
The parka has handwarmer pockets on both sides, chest pockets big enough for a mini tablet, and inside pockets with zips. Internally adjustable at the waist, and the sleeves can be adjusted using Velcro. Two-way zip, wristlets at sleeve ends and cut transfer reflector tape. 
With this parka, you can tackle any job in wintertime. The button-on helmet-fitted hood 2167 is sold separately. 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/cm² and ATPV 39 cal/cm².  EN 1149, EN ISO 11612, EN ISO 11611, EN 13034 and EN ISO 20471.  EN 343 4/1 – Water column rating: 12,000 mm.  EN 342 together with model 1817 – CLO rating 2.19, Icler 0.339 m² K/W.

Winter Parka Multinorm Inherent

The ultimate flame resistant winter jacket from Blåkläder, with a women’s cut. The ideal choice if you work in exposed flame environments, this jack- et also readily shields you against cold, wind and rain with its warm lining, laminated fabric and taped seams. 
A completely metal free garment with cut transfer reflector tape and reflective details on the shoulders ensuring visibility in every direction, cozy fleece inside the pockets and a two-way plastic zip. 
This oil, dirt and water-repellent jacket can overcome any weather challenges, so that you can tackle any job. Helmet-fitted hood 2167 sold separately. The jacket is also available in a men’s model 4517. 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/cm² and ATPV 39 cal/cm².  EN 1149, EN ISO 11612, EN ISO 11611, EN 13034 and EN ISO 20471.  EN 343 4/1 – Water column rating: 12,000 mm.  EN 342 together with model 1817 – CLO rating 2.19, Icler 0.326 m² K/W.

Women's Winter Jacket Multinorm Inherent

The ultimate flame retardant winter jacket from Blåkläder. The ideal choice if you work in exposed flame environments, this jacket also readily shields you against cold, wind and rain with its warm lining, laminated fabric and taped seams. 
A completely metal free garment with cut transfer reflector tape and reflective details on the shoulders ensuring visibility in every direction, cozy thermal fleece inside the pockets and a two-way plastic zip. 
This oil, dirt and water-repellent jacket can overcome any climate challenge, so you can tackle any job. Helmet-fitted hood 2167 sold separately. The jacket is also available in a women’s model 4917. 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/cm² and ATPV 39 cal/cm². EN 1149, EN ISO 11612, EN ISO 11611, EN 13034 and EN ISO 20471. EN 343 4/1 – Water column rating: 12,000 mm. EN 342 together with model 1817 – CLO rating 2.19, Icler 0.339 m² K/W.

Winter Jacket Multinorm Inherent

Thin and very flexible shell jacket in a women’s fit made from inherently flame-resistant material. This wind and waterproof shell jacket with taped seams, non-polyester and non-metal, is a highly sought-after product. The jacket is equipped with soft and flexible reflective transfers and has good breathability and dark colours in areas prone to dirt. 
The jacket is equipped with loops on the chest for attaching technical equipment such as microphones, gas detectors or oxygen meters. The slightly higher, adjustable hood can be adjusted to go over a helmet without reducing your field of vision. 
The shell jacket has a chest pocket with ID card holder, Napoleon pocket with room for a small tablet, two stomach pockets with zippers and an ID card holder in one of the pockets. Also available in a men’s model 4088. 
Certified to EN 1149-5, EN 13034, EN ISO 20471. EN 343. EN ISO 11611. EN ISO 11612. IEC 61482-2. ATPV: 21 cal/cm², ELIM: 19 cal/cm².

Women’s Shell Jacket Multinorm Inherent

Thin and very flexible shell jacket whose material is inherently flame retardant. This wind and waterproof shell jacket, free of polyester and metal, is a highly sought-after product that is now becoming Blåkläder's first in the genre, and it comes with our tangible sense of quality. 
The jacket is equipped with soft and compliant transfer reflectors, has good breathability and dark areas in exposed areas. The jacket is equipped with loops on the chest to attaching gas detectors and oxygen meters. The slightly higher and adjustable hood can be adapted to have a helmet underneath. 
Certified according to EN 1149-5, EN 13034. EN ISO 20471. EN 343. EN ISO 11611. EN ISO 11612. IEC 61482-2.

Shell Jacket Multinorm Inherent

Metal- and polyester-free softshell jacket in Hi-vis that is inherently flame-retardant. The wind and water-resistant jacket is made of softshell material and has excellent breathability. It also has an extended back, pre-bent sleeves and cuffs at the sleeve ends that improve the already fantastic comfort. 
The jacket is equipped with two gas loops, which are hoops to hang gas detectors and oxygen meters in. This makes the softshell jacket extra useful for work in, for example, petrochemical environments or the oil and gas industry. 
It is certified according to EN 1149-5. EN 13034. EN ISO 20471. EN ISO 11611. EN ISO 11612. IEC 61482-2.

Softshell Jacket Multinorm Inherent

Metal- and polyester-free softshell jacket with women’s fit in hi-vis that is inherently flame-resistant. The wind and water-resistant jacket is made of an oil, dirt and water-repellent softshell material and has excellent breathability. It also has an extended back, pre-bent sleeves and cuffs at the sleeve ends, improving the already fantastic comfort. 
The jacket has functional pockets and two gas loops, which are hoops to hang gas detectors and oxygen meters in. This makes the softshell jacket extra useful for work in, for example, petrochemical environments or the oil and gas industry. 
It is certified according to EN 1149-5. EN 13034. EN ISO 20471. EN ISO 11611. EN ISO 11612. IEC 61482-2.

Women's Softshell Jacket Multinorm Inherent

A lightly padded shell jacket suitable for all seasons, made from a wind and waterproof breathable material with an oil- and dirt-repellent surface. With an antistatic and inherently flame-resistant design, completely metal-free, it minimizes the risk of ignition and meets all requirements of the ATEX directive.
The shell jacket features a high collar and a concealed, robust two-way plastic zip. Reflective details enhance visibility, along with an extended back and a drawstring hem. Prepared with attachment points for hood 2164, sold separately.
The jacket is equipped with two gas loops for attaching gas detectors, oxygen meters and microphones. This makes it especially useful for work in petrochemical environments or the oil and gas industry. Also suitable for the energy sector, including roles in solar, wind and hydro power.
Certified according to EN 343 4.1, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2, APC 2.

Shell Jacket Inherent

A jacket in inherent flame-resistant material, built for work where the risks are higher and the demands are clear. The combination of a durable outer fabric and a thin lining gives the jacket APC 2, the higher protection class for electric arc. 
The material is soft, flexible and durable, with the flame resistance built into the fibre. The style features smart pocket solutions such as twin chest pockets with covered zips. The fabric has ripstop functionality, which makes it more durable and increases tear resistance. 
The jacket is developed to perform in demanding environments, with a focus on safety, durability and function. It is also free from metal components and PFAS. 
Certified to EN ISO 11612 – protection against heat and flame, EN ISO 11611 – protection for welding and allied processes, EN 13034 – protection against liquid chemical splashes, EN 1149 – antistatic protection, EN 61482-2 – protection against thermal hazards of an electric arc, EN ISO 20471 – high visibility, OEKO-TEX® Standard 100 – tested for harmful substances. 
Also available as men’s model 4418.

Women’s APC 2 Multinorm Inherent Jacket

Flame retardant, lined winter jacket in 1519 quality, an inherent Class E3 fabric specially designed for work in metal industries that deal with molten iron. The 360-degree visible but not hi-vis certified winter jacket is designed to protect against splashing from molten metal, and radiant heat, while the lining keeps you warm in cold environments. 
Sewn-on, optimally placed reflective details, pre-bent sleeves, extended back, inside pocket, inset pockets and holders for gas detector, oxygen meter and microphone. The jacket is oil, dirt and water-repellent. 
Certified to EN 1149-5, EN13034, EN ISO 11612, EN ISO 11611, IEC 61482-2, ATPV: 40cal/cm², ELIM: 37cal/cm².

Jackets